ГОСТ BЖЛ8 Enquiry | Print this page
ГОСТ BЖЛ8 Details
BЖЛ8
ГОСТ BЖЛ8 Standard Download
Category | Type | Grade | Designations |
---|---|---|---|
Grades | Special Alloy | BЖЛ8 | Russia - ГОСТ , |
Chemical composition % of the ladle analysis of grade BЖЛ8
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | B(%) | Al(%) | Ti(%) |
---|---|---|---|---|---|---|---|---|---|---|
0.10- 0.20 | 0.7 | 0.6 | Max 0.02 | 0.015 | 14.8- 17.0 | Balance | 4.5- 6.0 | 0.06 | 2.5- 3.5 | 1.8- 2.5 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
683 (≥) | 736 (≥) | 14 | 14 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 431 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
122 (≥) | 461 (≥) | 42 | 22 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 342 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
289 | 966 | 468 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
BЖЛ8 | Russia TY standard grades and chemical compositions of the high temperature alloy castings |