EN 1.0614 Enquiry | Print this page
EN 1.0614 Details
Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general-purpose wire rod
EN 1.0614 Standard Download
Category | Type | Grade | Designations |
---|---|---|---|
Grades | Structural Steel | 1.0614 | - EN , EN 10016-2 (1994) | EN ISO 16120-2 (2011) | |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | 0.73 | 0.78 | ||
Si | 0.10 | 0.30 | ||
Mn | 0.50 | 0.80 | ||
P | - | 0.035 | ||
S | - | 0.035 | ||
Cr | - | 0.15 | ||
Ni | - | 0.20 | ||
Cu | - | 0.25 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
696 (≥) | 791 (≥) | 13 | 11 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 322 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
551 (≥) | 231 (≥) | 14 | 34 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 143 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
541 | 542 | 968 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
1.0614 | EN | Whole | Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general-purpose wire rod |