Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
SAE A 988 S31254 Enquiry | Print this page
SAE A 988 S31254 Details
SAE A 988 S31254 Standard Download
| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | A 988 S31254 | Austenite | USA - SAE , A 988/A 988M (2011) | |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.02 | ||
| Mn | - | 1.00 | ||
| Si | - | 0.80 | ||
| P | - | 0.03 | ||
| S | - | 0.01 | ||
| Cr | 19.50 | 20.50 | ||
| Ni | 17.50 | 18.50 | ||
| Mo | 6.00 | 6.50 | ||
| Cu | 0.50 | 1.00 | ||
| N | 0.18 | 0.22 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 654 (≥) | 681 (≥) | 24 | 31 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 413 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 471 (≥) | 652 (≥) | 32 | 24 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 244 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 855 | 164 | 959 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 167 S31254 | SAE | USA | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
| A 213 S31254 | SAE | USA | Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
| A 240 S31254 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 249 S31254 | SAE | USA | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| A 269 S31254 | SAE | USA | Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
| A 270 S31254 | SAE | USA | Seamless and Welded Austenitic Stainless Steel Sanitary Tubing |
| A 276 S31254 | SAE | USA | Stainless Steel Bars and Shapes |
| A 312 S31254 | SAE | USA | Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| A 358 S31254 | SAE | USA | Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
| A 403 CRS31254 | SAE | USA | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
| A 403 WP S31254 | SAE | USA | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
| A 409 S31254 | SAE | USA | Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
| A 473 S31254 | SAE | USA | Stainless Steel Forgings |
| A 479 S31254 | SAE | USA | Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
| A 688 S31254 | SAE | USA | Welded Austenitic Stainless Steel Feedwater Heater Tubes |
| A 813 S31254 | SAE | USA | Single- or Double-Welded Austenitic Stainless Steel Pipe |
| A 814 S31254 | SAE | USA | Cold-Worked Welded Austenitic Stainless Steel Pipe |
| A 943 S31254 | SAE | USA | Spray-Formed Seamless Austenitic Stainless Steel Pipes |
| A 959 S31254 | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| A 988 S31254 | SAE | USA | Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |