AFNOR 1.4310 Enquiry | Print this page
AFNOR 1.4310 Details
Steel wire for mechanical springs - Part 3: Stainless spring steel wire
AFNOR 1.4310 Standard Download
| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | 1.4310 | Austenite | France - AFNOR , NF EN 10088-1 | NF EN 10088-2 | NF EN 10088-3 | NF EN 10151 | NF EN 10263-5 | NF EN 10264-4 (2002) | NF EN 10270-3 | |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.05 | 0.15 | ||
| Si | - | 2.00 | ||
| Mn | - | 2.00 | ||
| P | - | 0.045 | ||
| S | - | 0.015 | ||
| Cr | 16.00 | 19.00 | ||
| Mo | - | 0.08 | ||
| Ni | 6.00 | 9.50 | ||
| N | - | 0.11 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 482 (≥) | 874 (≥) | 42 | 14 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 243 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 335 (≥) | 821 (≥) | 33 | 42 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 132 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 477 | 363 | 753 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| X10CrNi18-8 | AWS | Germany | Stainless steels - Part 1: List of stainless steels |
| 1.4310 | AWS | Germany | Stainless steels - Part 1: List of stainless steels |
| X10CrNi18-8 | B.S. | UK | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
| 1.4310 | B.S. | UK | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
| X10CrNi18-8 | AFNOR | France | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
| 1.4310 | AFNOR | France | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
| X10CrNi18-8 | ISO | International | Stainless steels - Chemical composition |
| X10CrNi18-8, 1.4310, 301, 301S21, Z12CN17-07 | EN | European | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |